bizhub185 打印机清零(bizhub185打印机重置指南)

Introduction

Resetting your bizhub185 printer is an important troubleshooting step that can help solve various user and firmware errors. This guide will help you perform a complete reset on your bizhub185 printer. In this article, you'll find step-by-step instructions on how to reset your printer, restore factory settings, and troubleshoot common issues.

Step 1: Clearing the Memory

The first step to resetting your bizhub185 printer is to clear its memory. To do this, turn off the printer and unplug it from the power source. Wait for a minute before plugging it back in and turning it on. This will give the printer enough time to discharge any stored energy in its memory, effectively clearing it out.

Step 2: Restoring Factory Settings

This step will delete all the customized settings that you have set on your printer. It is useful if you encounter a persistent or recurrent error with your printer. To restore factory settings, find and press the "Utility/Counter" button located at the bottom right corner of the printer’s control panel. After that, press the "Administrator Setting" button, followed by "System Settings" and then "Reset Settings." Finally, press "Yes" to confirm the restoration of factory settings to your bizhub185 printer.

Step 3: Troubleshooting Common Issues

Some common issues that you might encounter with your bizhub185 printer include paper jam, poor print quality, and networking problems. To resolve these issues:

For paper jams, open the printer cover and remove any paper that is jammed between the rollers. Ensure that there are no torn or creased papers in the tray before resuming printing.

Poor print quality may be caused by dried ink clogs on the print head. To resolve this, use a damp cloth or cotton swab to clean the print head gently. Don't use any stronger cleaning agents, as they might damage the printer’s components.

Without a proper network connection, the printer cannot print documents. Ensure that the printer is correctly connected to your network by verifying that the respective LEDs are lit on your printer’s Ethernet port. If the LED is not on, disconnect the cable from both the printer and the router. Reconnect the cable and check if the LED is lit now.

Conclusion

Resetting your bizhub185 printer back to its default settings can fix some common issues that you might encounter while using the printer. Clearing the printer's memory and restoring factory settings can help resolve most issues and errors experienced by many users. However, in cases where troubleshooting and resetting do not solve the problem, contacting the manufacturer's support team is recommended. With these tips, you should be able to reset your bizhub185 printer and continue enjoying its services smoothly.